The wood router China adopt two spindle, the power is one 6.0kw and another is 4.5kw, both of the spindle is the air cooling.
Except two spindle, there are also have one 5+4 drills in the middle of two spindle.
The table of wood router china adopt vacuum table with 11kw vacuum pump, high power can suck the machine tight and make it stable enough.
The vacuum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing, Zones can be turned off easily via control valves on the front of the machine.
router china adopt Taiwan AIRTAC cylinders and equipped with aluminum
slots, it will rise up and fall down at the same time. This design will
increase the contact area to improve material accuracy and prevent the
small parts falling down.
Wood router china adopt good quality electrical pats, like France Schneider and Japan SMC. Both of this brand are famous with the good quality, from the small parts you can see the power of our company.
Z Working Area
Seamless welded thick channel steels & square tubes
Double vacuum table
Italy 6kw + Italy drill +CC 6kw air cooling spindle
Germany WMH helical gear
Taiwan TBI rolling ball screw
Taiwan 25mm square guild rails
Japan YASKAWA servo motor
Japan SHIMPO reducer
7.5kw dust system
11kw water vacuum pump
Airtac pop-up pins