* Wardrobe making machine is made from Philicam China, a wood cnc router machine manufacture which has more than decade years experience.
Spindle
The wardrobe making machine has one 9.0kw air cooling spindle and one 5+4 drills.
The spindle with the function of ausomatic tools changer and there are 12 position on the magazine which can match your requirements.
Table
The table of wardrobe making machine adopt vacuum table with 11kw vacuum pump, high power can suck the machine tight and make it stable enough.
The vacuum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing, Zones can be turned off easily via control valves on the front of the machine.
Pop-up pins
Wardrobe making machine adopt Taiwan AIRTAC cylinders and equipped with aluminum
slots, it will rise up and fall down at the same time. This design will
increase the contact area to improve material accuracy and prevent the
small parts falling down.
Electrical parts
Wardrobe making machine adopt good quality electrical pats, like France Schneider and Japan SMC. Both of this brand are famous with the good quality, from the small parts you can see the power of our company.
Parameter
Description | Parameters |
Z Working Area | 200mm |
Lathe Structure | Seamless welded thick channel steels & square tubes |
Table | Double vacuum table |
Controller | SYNTEC 6MD |
Spindle | Italy 9kw air cooling spindle |
Tolls Magazine | 12 Positions |
Drill | CC 5+4 Drills |
X,Y Transmission | Germany WMH helical gear & rack |
Z Transmission | Taiwan TBI rolling ball screw |
Guide Rail | Taiwan 25mm square guild rails |
Motor | Japan YASKAWA servo motor |
Reducer | Japan SHIMPO reducer |
Dust System | 7.5kw dust system |
Vacuum Pump | 11kw water vacuum pump |
Cylinder | Airtac cylinder |
Electrical parts | France Schneider |
Air Pipes Connector | Japan SMC |
Software | CV Software |
Pushing Device | Yes |
Packing Size | 4300*2280*2600mm |
Weight | 3500kg |
Samples
Factory
Contact Jenna